How to Install and Operate the Mojgar 550 LBS Commercial Ice Maker: A Complete Guide

If you're looking for a high-efficiency and durable ice maker to support your commercial needs, the Mojgar 550 LBS Commercial Ice Maker is an excellent choice. To help you get started, this guide provides detailed installation steps and operating instructions to ensure smooth setup and easy operation of your ice maker.

Part 1: Installation Guide for the Mojgar 550 LBS Ice Maker

Step 1: Install the Ice Bucket Section

1. Flip the Ice Bucket Over:

   • Begin by flipping the ice bucket to prepare for installation.

2. Install the Adjustable Feet:

   • Attach four adjustable feet to the bottom of the ice bucket. These feet can be adjusted to level the machine, ensuring stability and preventing any potential malfunctions due to an uneven setup.

3. Wrap PTFE Tape Around the Drainage Outlet:

   • Wrap PTFE (plumber's) tape around the thread of the drainage outlet to prevent leaks.

4. Install the Drainage Outlet:

   • Insert the drainage outlet into the designated hole in the ice bucket and tighten it securely with a wrench.

5. Connect the Drainage Pipe:

   • The drainage pipe has two ends with different diameters. Insert the smaller end of the pipe into the drainage outlet to secure the connection.

Step 2: Install the Host (Main Unit)

1. Position the Host:

   • The host unit features a positioning column with different lengths on each end. Insert the shorter end of the column into the hole of the ice bucket.

2. Place the Host onto the Ice Bucket:

   • Align the host with the positioning column and place it securely onto the ice bucket.

Step 3: Install the Filter

1. Prepare the Filter:

   • Place the rubber ring and PP cotton into the filter to ensure proper filtration of water, which is essential for making clean ice.

2. Secure the Filter Lid:

   • Tighten the lid of the filter securely with a wrench to prevent any leaks.

3. Install the Filter Bracket:

   • Install the filter bracket and hang the filter on the hook, making sure not to tighten the hook completely.

4. Handle the Water Inlet and Outlet:

   • Wrap PTFE tape around the threads of the water inlet and outlet, and install a rubber ring to ensure a tight seal.

5. Connect the Water Inlet:

   • Install the water inlet, tighten it with a wrench, and connect the other end to the tap water supply.

6. Connect the Water Outlet:

   • Install the water outlet, tighten it with a wrench, and insert the other end into the Ice Making inlet on the host unit.

7. Connect the Drainage Pipe:

   • Attach the smaller drainage tube from the accessories to the drainage outlet of the host.

Step 4: Final Checks and Powering On

1. Check All Connections:

   • Ensure all connections are secure and there are no loose fittings or leaks from water or drainage pipes.

2. Power On the Machine:

   • Plug in the power cable, turn on the water supply, and the machine will be ready to operate as soon as the screen lights up.

3. Complete the Installation:

   • The installation process is now complete, and the unit is ready for ice production.

Part 2: Operating Instructions for the Mojgar 550 LBS Ice Maker

Once the machine is installed, here’s how to operate it for efficient ice production. The Mojgar 550 LBS Commercial Ice Maker is user-friendly, and the following steps will guide you through its operation.

1. Turning On the Ice Maker

1. Power and Water Supply:

   • Turn on both the power and the water supply. The screen will light up, indicating that the machine is powered on, and the water shortage symbol will appear initially.

2. Start the Ice Maker:

   • Press the On/Off button. After a few seconds, the cleaning symbol will light up, and the water shortage symbol will disappear, indicating the machine has entered cleaning mode.

3. Cleaning Mode:

   • The cleaning process will run for about 20 seconds. Once cleaning is complete, the snowflake symbol will light up, indicating that the ice-making process has started.

4. Enter Ice-Making Mode:

   • As the machine cools, the compressor will start, and the temperature will begin to rise.

5. Forced De-icing:

   • Press the On/Off button while cooling, and the machine will enter forced de-icing mode. Once de-icing is completed, it will automatically enter standby mode.

2. Cleaning and De-icing Function

1. In Ice-Making Mode:

   • Press the Clean/De-icing button (second button) to initiate forced de-icing. The second light on the screen will turn on. Once de-icing is complete, the machine will return to ice-making mode.

2. In Standby Mode:

   • Press the Clean/De-icing button to enter cleaning mode. The last light on the screen will turn on, and the machine will clean for 5 minutes before returning to standby mode.

3. Timer Function

1. Setting the Timer for Shutdown:

   • In ice-making mode, press and hold the Timer button for 3 seconds. The screen will display "1" (1 hour) or "2" (2 hours). Select the time for automatic shutdown.

   • Press and hold the Timer button again for 3 seconds to deactivate the timer.

2. Setting the Timer for Startup:

   • In standby mode, press and hold the Timer button for 3 seconds to set the time for automatic startup.

4. Adjusting Ice Thickness

1. In Any Mode:

   • Press the up arrow to increase the ice thickness (the higher the number, the thicker the ice). Press the down arrow to decrease the thickness (the lower the number, the thinner the ice).

   • The adjustable range is from -6 to +6, with the default set to 0.

5. Full Ice Indicator

• The full ice symbol will appear when the ice bucket is full, reminding you to remove the ice.

Conclusion

With this comprehensive guide, you can easily install and operate your Mojgar 550 LBS Commercial Ice Maker, ensuring that it runs efficiently and produces high-quality ice for your business. Regular maintenance and cleaning will help ensure a long lifespan for your machine.

If you encounter any issues during the installation or operation, refer to this guide for troubleshooting or contact customer support for further assistance.